How do I add a camera in D View Cam v3 x
Step 1: Launch the D-ViewCam Main Console.
Step 2: Click General Settings and click Settings
Step 3: Click on the Camera tab select either Search or Insert
Search
Step 4: If Choosing Search, click the Start Scan button to initiate the Search. Select each camera, enters its username and password (if any) and click OK
Insert
Step 5: If choosing Insert, you will need to manually enter the camera details.
Note: If the camera is located at a remote DNS address select the check box for DNS and enter the DNS address name.
Your Camera(s) should now be visible.
Step 2: Click General Settings and click Settings
Step 3: Click on the Camera tab select either Search or Insert
- Search- D-ViewCam will scan your network looking for your available Cameras
- Insert- User must manually enter the Camera information (IP address,make,model etc.)
Search
Step 4: If Choosing Search, click the Start Scan button to initiate the Search. Select each camera, enters its username and password (if any) and click OK
Insert
Step 5: If choosing Insert, you will need to manually enter the camera details.
Note: If the camera is located at a remote DNS address select the check box for DNS and enter the DNS address name.
Your Camera(s) should now be visible.
These may also help:
- How do I change the storage location in D ViewCam v3 x Read Answer
- How do I setup the D ViewCam Mobile app with a PC running D ViewCam Read Answer
- $name Read Answer
- How do you setup Motion Detection Recording in D ViewCam Read Answer
- How do you setup Scheduled Recording in D ViewCam Read Answer