Please follow the below steps in order to setup your ShareCenter.

Step 1: Connect an Ethernet cable to the available Ethernet port. This cable should connect the ShareCenter to your local network via a router or switch, or directly to a computer for configuration.

Note: The computer used to access the ShareCenter web-based configuration manager must be on the same subnet as the ShareCenter.

Step 2: Go to the mydlink support page and download the setup wizard specific to your model and operating system. Unzip it to your desktop or a folder on your PC.

Step 3: Open a web browser and enter the IP address of your ShareCenter to access the Web UI. If you have a DHCP-enabled router on your network, you may need to check the DHCP table to see what IP address the ShareCenter was assigned.

Note:If your network is using a DHCP server and the computer receives IP settings from the DHCP server, the ShareCenter will automatically be in the same subnet.

Step 4: Select System Administrator and click the Login button (leave the password blank by default). Once you are logged in, click Management and then click Setup Wizard. Follow the on-screen instructions to configure your D-Link cloud storage.

Note: Please refer to the manual for more information.