Step 1: Open your web browserand enter the firewall IP address (default192.168.1.1) then press Enter.

Step 2: Enter your username and password, pressOK.

Step 3:Press Firewall andPolicy

Steg 4: Select optionLAN->WAN

Steg 5: The firewall has 4 standardLAN->WAN rules available. Leave thedrop_smb_all rule unchanged as it is blockingoutgoing NetBIOS packets.

Steg 6: Press Edit to changerule #2.

Steg 7: Select Delete thisrule further down on the page.

Then, press Apply to save the settings. Repeatthis step for rule #3 and #4.

Steg 8: Create a rule whichallows DNS, it will be needed to translate domain namesto IP addresses.

Press Firewall thenPolicy.

Steg 9:Press LAN->WAN

Steg 10: Press Add new.

Steg 11: Enter the following:

1. Name - allow_dns
2. Action - Allow
3. Service - dns-all
4. Schedule - Always

Steg 12: Press Apply to savethe settings

Repeate the steps 8-12 and create 3 rules with the followingsettings:

Rule 2 allows http anrop

1. Name - allow_http
2. Action - Allow
3. Service - http-all
4. Schedule - Always

Rule 3 allows SMTP requests

1. Name - allow_smtp
2. Action - Allow
3. Service - smtp
4. Schedule - Always

Rule 4 allows POP3 requests

1. Name - allow_pop3
2. Action - Allow
3. Service - pop3
4. Schedule - Always

Step 13: Press theActivate button from the lower left side ofthe page, to save all settings.

Step 14: Press ActivateChanges to reboot the firewall with the new settingsactivated.